BG 
BY 
CY 
CZ 
DE 
EE 
ES 
EU 
GR 
HU 
IS 
IT 
LT 
LV 
MY 
PL 
PT 
RO 
SK 
TR 
UA Ermenrich Verk LY60 Digital Level
Magnetic base. For measuring angles of slope. Units of measurement: degrees, percent, mm/m, in/ft
| Product ID | 81742 |
| Brand | Ermenrich |
| Warranty | 5 years |
| EAN | 5905555021416 |
| Package size (LxWxH) | 2x24.4x3.1 cm |
| Shipping Weight | 1.5 kg |
The Ermenrich Verk LY60 is a mid-length digital level for the precise horizontal and vertical alignment of objects as well as measuring various angles. It is used to measure angles over a wide range – 0–360° (4x90°). It has built-in bubble vials, so the device can also be used as a standard bubble level. The level is excellent for construction, repair, and installation for both industrial and domestic purposes. You can use it for the precise alignment of workpieces on machine tool tables, sine plates, modular fixtures, and for mounting mechanisms on foundations and piles.
Ermenrich Verk LY60 Digital Level gives readings in one of four units of measurement. IP54 dust- and waterproof-rated, high-strength body ensures long and efficient operation of the device. The bright color makes the device noticeable in a construction site or production facility. The auto-off activates after 3 minutes of inactivity and the low battery status indicator ensure that the level will run longer on a single set of batteries. There is a convenient cutout carrying handle for extra ease of carrying and use.
Key features:
- High accuracy measurement of angles and vertical/horizontal slopes
- 4 units of measurement available, a hold function, a zero set function
- Rugged body with a magnetic base, moisture and dust-proof
- Powered by batteries, a low battery status indicator, and an auto-off function
| Product ID | 81742 |
| Brand | Ermenrich |
| Warranty | 5 years |
| EAN | 5905555021416 |
| Package size (LxWxH) | 2x24.4x3.1 cm |
| Shipping Weight | 1.5 kg |
| Level type | digital, bubble |
| Accuracy | ±0.1° at 0° and 90°, the rest – ±0.2° |
| Units of measurement | mm, m, ft, in, degrees, percent |
| Measuring range, ft | 0 — 1181.2 |
| LCD screen | yes |
| Maximum resolution | 0.05° |
| Calibration | manual |
| Hold function | ✓ |
| Zero set function | ✓ |
| Magnetic base | ✓ |
| Power supply | 2 AAA batteries, 1.5V (not included) |
| Visual fault locator (VFL) | ✓ |
| Auto power off | 3 min |
| IP water and dustproof rating | IP54, partially dustproof, splashproof |
| Body | aluminum, high-strength ABS plastic, thermoplastic rubber |
| Operating temperature range, °F | 32...+104 |
| Length, mm | 600 |
| Additional | audible buzzer alert , built-in bubble level – 2 pcs. |
How do I reset or exit this CAL2 mode?
thanks for your query.
Turn the device off. Place it on a flat surface. Hold the POWER/BUZZER button and CAL button down until the CAL icon appears on the LCD display. Enter calibration mode. Do not move the device and then press the CAL button. The CAL1 icon will appear on the display.
Rotate the device 180° and then press the CAL button. Then, the CAL1 icon will appear on the display. When the CAL2 icon disappears from the display, it means that calibration is complete. The calibration must be performed on a flat and smooth surface with a slope not exceeding 5°. If it exceeds 5°, the display will show the Err icon, indicating that the calibration cannot be performed.
Note: The device is calibrated in the factory for maximum accuracy. Users can recalibrate the device when necessary.
Please let us know if you have any questions.
