Levenhuk MED X/Y Calibration Slide

The Levenhuk MED X/Y calibration slide is an accessory that is required to calibrate the image analysis program. It determines the correction factor, so the program can quickly convert values to different units of measurement. The calibration slide can be used with all brands of microscopes.

The Levenhuk MED X/Y calibration slide is a piece of transparent glass. A micrometer scale is in the center. The minimum division is 0.01mm. There are circles of different diameters (1.5mm, 0.6mm, 0.15mm and 0.07mm) on both sides of the scale.

How to use the calibration slide:

1. Fix the slide on the microscope stage.
2. Rotate the revolver to select the working objective.
3. Set the camera to shooting mode at maximum resolution, and then take a photo of the scale.
4. In the image analysis program, select the calibration mode, use the mouse to indicate the maximum visible distance, and then enter the resulting value in real units.
5. Enter the name of the calibration and double-check the values.
6. If everything is done correctly, the program will remember the correction factor, and in the future, it will independently convert the values into the required units of measurement.